Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (2024)

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (1)

Table of Contents

  1. Capital Budgeting Decisions
  2. Capital Budgeting
  3. Importance of Capital Budgeting Decisions
  4. Capital Budgeting Techniques
  5. Book Profit v. Cash Flow
  6. Accounting/AverageRate of Return (ARR)
  7. Payback Period (Traditional)
  8. Discounted Payback Period
  9. Net Present Value (NPV)
  10. Profitability Index (PI)/Desirability Factor (DF)/Present Value Index Method
  11. Internal Rate of Return (IRR)
  12. Modified Internal Rate of Return (MIRR)
  13. Replacement Decision
  14. Capital Rationing
  15. Unequal Life of Projects
  16. Decision Under Various Techniques
  17. Special Points
  18. Frequently Asked Questions
Check out  whichcovers all past exam questions (sub-topic-wise) & detailed answers for the CA-Inter exam by ICAI till Nov. 2023. It includes sub-topic-wise questions, solved model test papers and chapter-wise summary notes with relevant formulae.CA-Inter | New Syllabus | May 2024 Exam

1. Capital Budgeting Decisions

Capital budgeting decision refers to the decision in respect of purchase or sale of fixed assets and long term.

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (2)

2. Capital Budgeting

Capital budgeting refers to application of appropriate capital budgeting technique (one or more) to evaluate any capital budgeting proposal and take capital budgeting decision.

3. Importance of Capital Budgeting Decisions

  1. Involvement of Substantial Expenditure
  2. Long-TermEffect/Growth
  3. Involvement of High Risk
  4. Irreversibility
  5. Complex Decisions

4. Capital Budgeting Techniques

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (3)

5. Book Profit v. Cash Flow

BookProfit:Itisalsoknownasaccountingprofit.

Cash Flow:It is focused on cash inflow and outflow and ignore all non-cash activities

ProformaBookProfitandCashFlowAfterTax

Particulars

`₹

Sales

XXX

Less:VariableCost(AlwaysCash)

(XXX)

Contribution

XXX

Less:CashFixedCost

(XXX)

Less:Depreciation(Non-Cash*tem)

(XXX)

ProfitBeforeTax(AccountingorBookProfit)

XXX

Less:Tax@50%

(XXX)

ProfitAfterTax(AccountingorBookProfit)

XXX

Add:Depreciation(Non-Cash*tem)(XXX)
CashFlowAfterTax(CFAT)/CashReceiptsAfter TaxXXX

CashFlowAfterTax(CFAT):

  • CFAT = PAT + Depreciation
  • CFAT = Cash Receipt Before Tax (1 – t) + Depreciation × t
  • CFAT = Cash Receipt Before Tax (1 – t) + Tax Shield on Dep.
  • CFAT = Cash Receipt Before Tax – Tax on PBT

6. Cash Flow & Discounted Cash Flow (DCF):

Cash Flow: Cash flow without considering time value of money.

Discounted Cash Flow: Cash flow after considering time value of money.

Discounted Cash Flow (Formulae):

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (4)

Note:

  • ARR Technique is based on Accounting/Book Profit
  • Payback Period is based on Cash Flow (Non-Discounted)
  • Discounted Payback, NPV, PI and IRR Techniques are based on Discounted Cash Flow
  • MIRR technique if based on Future/Compounded Cash Flow
  • DiscountedCashFlowisalsoknownasPresentValueofCashFlow

7. Accounting/AverageRate of Return (ARR)

ARR is the rate of return in terms of average book profit onIt can be calculated by using one of the following three methods:

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (5)

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (6)

Step2:CalculateAverageRateofReturnofAnnualARRinStep1

Note:

  • Average Investment = ½ × (Initial Investment + Salvage) + Additional Working Capital (If Any)

Or

  • Average Investment = (½ × Depreciable Investment) + Salvage + Additional Working Capital

8. Payback Period(Traditional)

It is refers to the period within which entire amount of investment is expected to be recovered in form of Cash.

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (7)

Situation2:Unequal Cash Receipts:

Step 1:Calculate Cumulative Cash Inflow

Step 2:Calculate Payback Period

9. Discounted Payback Period

It is referred to the period within which entire amount of investment is expected to be recovered in form of Discounted

Step 1: Calculate Cumulative Discounted Cash Inflow

Step 2: Calculate Discounted Payback Period

10. Net Present Value (NPV)

The net present value of a project is the amount, in current value of amount, the investment earns after paying cost of capital in each period.

NPV = PV of Inflow – PV of Outflow/Initial Investment Or

NPV = (PI – 1) × PV of Outflow/Initial Investment

11.Profitability Index (PI)/Desirability Factor (DF)/Present Value IndexMethod

PI=PVofInflow÷PVofOutflow/InitialinvestmentOr

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (8)

Note: PI technique is useful:

  • In case of Capital Rationing with indivisible projects
  • In case of equal NPV under mutually exclusive projects

12. Internal Rate of Return (IRR)

Internal rate of return refers to the actual rate of return generated by the project. Internal rate of return for an investment proposal is the discount rate that equates the present value of the expected cash inflows with the initial cash outflow.

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (9)

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (10)

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (11)

13. Modified Internal Rate of Return (MIRR)

The MIRR is obtained by assuming a single outflow in the zero year and the terminal cash inflow.

Step1:Calculatecumulativecompoundedvalueofintermediatecashinflowby using cost of capital as rate of compounding.

Step2:Calculate MIRR:

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (12)

14. Replacement Decision

Decision in respect of replacement of an existing working machine with new one having higher production capacity or lower operating cost or both.

Step1:CalculateInitialOutflow:

Particulars``₹
PurchaseCostofNewMachineXXX
Less:SaleValue ofOldMachine(XXX)
Less: Tax Saving on Losson Sale of OldMachine(XXX)
Add:TaxPaymentonProfitonSaleofOldMachineXXX
Add:IncreaseInWorkingCapitalXXX
Less:DecreaseinWorkingCapital(XXX)
InitialOutflowXXX

Step2:CalculateIncrementalCFAT.

Step3:CalculateIncrementalTerminalValue(netoftax).

Step4:CalculateIncrementalNPVandTakeReplacementDecision.

15. Capital Rationing

Capital rationing refers to the process of selection ofoptimal combination of projects out of many subject to availability of funds.

Situation 1: Projects are Divisible:

Step 1: Calculate PI of all the available projects

Step 2: Give Rank to all projects on the basis of PI

Step 3: Select Projects on the basis of Rank

Situation 2: Projects are Indivisible:

Step 1: Calculate all possible combinations

Step 2: Select combination of projects having higher combined NPV

16. Unequal LifeofProjects

In case of comparison between two projects having different life we can solve the problem by using Equivalent Annualized Criterion:

Step 1: Calculate NPV of the projects or PV of outflow of the projects.

Step 2: Calculate Equivalent Annualized NPV or Outflow:

EquivalentAnnualisedNPVorOutflow=NPVorPVofOutflow/PVIFA

Step 3: Select the proposal having higher annualised NPV or Lower annualised outflow.

Note: Such problems can also be solved by using Common Life/Replacement Chain Method

17.DecisionUnderVariousTechniques

TechniquesYesNo
ARRARR≥DesiredReturnARR<DesiredReturn
TraditionalPaybackPayback≤Desired PaybackPayback>Desired Payback
DiscountedPaybackPayback≤Desired PaybackPayback>Desired Payback
NPVNPV≥0NPV<0
PIPI≥1PI<1
IRRIRR≥CostofCapitalIRR<Cost ofCapital
MIRRMIRR≥ CostofCapitalMIRR<CostofCapital

18. Special Points

  • Sunk Cost and Allocated Overheads are irrelevant in Capital Budgeting.
  • Opportunity Cost is considered in Capital Budgeting.
  • Working Capital introduced at the beginning of project (cash outflow) and recover (cash inflow) at the end of the project life.
  • Running Cost: Always Cash Cost.
  • Operating Cost: Variable Cost plus Fixed Cost (Including Depreciation) subject to operating cost must be > Depreciation.
  • Depreciation: Only as per Tax is relevant.
  • If nothing is specified: Depreciation as per books is assumed to be depreciation as per tax and Losses can be carry forwarded for tax benefit.

19. Frequently Asked Questions

FAQ 1. What is the between Net Present Value method and Internal Rate of Return method?

NPV:NPV or net present value refers to the net balance after subtract- ing present value of outflows from the present value of inflows. Present valueis calculated by using cost of capital as discount rate. As per NPV technique internal cash inflows are re-invested at cost of capital rate. NPV higher than zero indicates that project will provide return higher than cost of capital, zero NPV indicates that expected cash inflow will provide return equal to cost of capitalandnegativeNPVindicatesthatprojectwillfailtorecoverevencostof funds to be invested in proposal. Negative NPV leads to rejection of proposal. NPV is expressed in financial values and fails to provide actual rate of return associated with proposal.

IRR:IRR technique refers to actual rate of return associated with proposal. IRR refers to rate of discount at which present value of inflows and outflows are same or NPV is zero. IRR is expressed in percentage terms. As per IRR technique internal cash inflows are reinvested at IRR rate. IRR rate is compared with desired rate of return. Proposal is accepted when IRR is higher than desired rate of return and rejected when it is lower than desired rate of return.

There may be contradictory results under NPV and IRR techniques in some situationsduetosizedisparityproblem,timedisparityproblemandunequal expected lives.

FAQ 2. What is ‘Internal Rate of Return’?

IRR technique refers to actual rate of return associated with proposal. IRR refers to rate of discount at which present value of inflows and outflows are same or NPV is zero. IRR is expressed in percentage terms. As per IRR technique internal cash inflows are re-invested at IRR rate. IRR rate is compared with desired rate of return. Proposal is accepted when IRR is higher than desired rate of return and rejected when it is lower than desired rate of return.

FAQ 3. Which method of comparing a number of investment proposals is most suited if each proposal involves different amount of cash inflows? What are its limitations?

The best technique to compare number of investment proposals involves different amount of cash inflows is Profitability Index or Desirability Factor. In this technique present value of cash inflows is compared with present value of outflow and project is accepted if PI is 1 or above. It is calculated as :

DesirabilityFactororProfitabilityindex=PVofInflows/PV of outflows

LimitationsofProfitabilityIndex:

  • This technique cannot be used in case of capital rationing with indivisible
  • Many times single large project with high NPV is selected and ignored various small projects with higher cumulative NPV than selected single
  • There is a situation where a project with a lower profitability index may generate cash flows in such a way that another project can be also taken after one or two years later, the total NPV in such case will be higher than NPV of another project with highest Profitability Index today.

FAQ 4. What are the steps while using the equivalent annualized criterion?

FollowingarethestepsinvolvedinEquivalentAnnualisedCriterion:

Step 1: Calculate NPV of the projects or PV of outflow of the projects.

Step 2: Calculate Equivalent Annualized NPV or Outflow:

Equivalent Annualised NPV or Outflow = NPVorPVofOutflow/PVIFA

Step 3: Select the proposal having higher annualised NPV or Lower annualised outflow.

FAQ 5. What are the limitations of Average Rate of Return?

Following are the limitations of ARR:

  • The accounting rate of return technique, like the payback period technique, ignores the time value of money and considers the value of all cash flows to be equal.
  • The technique uses accounting numbers that are dependent on the organization’s choice of accounting procedures, and different accounting procedures, g.,depreciation methods, can lead to substantially different amounts for an investment’s net income and book values.
  • The method usesnetincomeratherthancashflows;whilenetincome isausefulmeasureofprofitability,thenetcashflowisabettermeasure of an investment’s performance.
  • Furthermore, the inclusion of only the book value of the invested assetignores thefactthataprojectcanrequirecommitmentsofworkingcapitaland other outlays that are not included in the book value of the project.

FAQ 6. What are the limitations of Internal Rate of Return?

FollowingsarethelimitationsofIRR:

  • The calculation process is tedious if there is more than one cash outflow interspersed between the cash inflows; there can be multiple IRR, the interpretation of which is difficult.
  • The IRR approach creates a peculiar situation if we compare two projects with different inflow/outflow patterns.
  • It is assumed that under this method all the future cash inflows of a pro- posal are reinvested at a rate equal to theIt ignores a firm’s ability to re-invest in portfolio of different rates.
  • If mutually exclusive projects are considered as investment options which have considerably different cash outlays. A project with a larger fund commitment but lower IRR contributes more in terms of absolute NPV and increases the shareholders’ wealth. In such situation decisions based only on IRR criterion may not be correct.

Disclaimer: The content/information published on the website is only for general information of the user and shall not be construed as legal advice. While the Taxmann has exercised reasonable efforts to ensure the veracity of information/content published, Taxmann shall be under no liability in any manner whatsoever for incorrect information, if any.

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods (2024)

FAQs

Overview of Capital Budgeting – Techniques | Decisions | Valuation Methods? ›

There are several capital budgeting analysis methods that can be used to determine the economic feasibility of a capital investment. They include the Payback Period, Discounted Payment Period, Net Present Value, Profitability Index, Internal Rate of Return, and Modified Internal Rate of Return.

What are the 7 capital budgeting techniques? ›

What are the seven capital budgeting techniques? The seven techniques include net present value (NPV), internal rate of return (IRR), profitability index (PI), payback period, discounted payback period, modified internal rate of return (MIRR), and real options analysis.

What are the capital budgeting methods? ›

Capital budgeting is the process by which investors determine the value of a potential investment project. The three most common approaches to project selection are payback period (PB), internal rate of return (IRR), and net present value (NPV).

What are the four types of capital budgeting? ›

There are four types of capital budgeting: the payback period, the internal rate of return analysis, the net present value, and the avoidance analysis. The choice of which of these four to use is based on the priorities and goals of the company.

What are the 5 most common budgeting methods? ›

5 budgeting methods to consider
Budgeting methodBest for…
1. The zero-based budgetTracking consistent income and expenses
2. The pay-yourself-first budgetPrioritizing savings and debt repayment
3. The envelope system budgetMaking your spending more disciplined
4. The 50/30/20 budgetCategorizing “needs” over “wants”
1 more row
Sep 22, 2023

What are the 7 types of budgeting? ›

The 7 different types of budgeting used by companies are strategic plan budget, cash budget, master budget, labor budget, capital budget, financial budget, operating budget. You can read about the Union Budget 2021-22 Summary in the given link.

What is the easiest method of capital budgeting? ›

Payback analysis is the simplest form of capital budgeting analysis, but it's also the least accurate. It is still widely used because it's quick and can give managers a "back of the envelope" understanding of the real value of a proposed project.

What are the two most commonly used methods of capital budgeting analysis? ›

This AI-generated tip is based on Chegg's full solution. Sign up to see more! Recognize that the problem is asking about capital budgeting methods and understanding that the net present value (NPV) and the internal rate of return (IRR) methods are commonly used ones.

What are the five 5 steps in capital budgeting? ›

The capital budgeting process consists of five steps:
  • Identify and evaluate potential opportunities. The process begins by exploring available opportunities. ...
  • Estimate operating and implementation costs. ...
  • Estimate cash flow or benefit. ...
  • Assess risk. ...
  • Implement.

What are the four major tools of capital budgeting? ›

Payback Period, Net Present Value Method, Internal Rate of Return, and Profitability Index are the methods to carry out capital budgeting.

What are the 3 methods that companies use to make capital budgeting decisions? ›

They are:
  • Payback method. Net present value method. ...
  • Payback Method. This is the simplest way to budget for a new asset. ...
  • Net Present Value Method. The Net Present Value (NPV) method is like the payback method; except for one important detail…. ...
  • Internal Rate of Return Method. ...
  • Conclusion.

What are the 6 processes of capital budgeting? ›

The process of capital budgeting includes 6 essential steps and they are: identifying investment opportunities, gathering investment proposals, decision-making processes, capital budget preparations and appropriations, and implementation and review of performance.

What are the various methods of capital budgeting? ›

There are several capital budgeting analysis methods that can be used to determine the economic feasibility of a capital investment. They include the Payback Period, Discounted Payment Period, Net Present Value, Profitability Index, Internal Rate of Return, and Modified Internal Rate of Return.

What most of the capital budgeting methods use? ›

Explanation: Most of the capital budgeting methods use cash flow numbers. Cash flow numbers are used because they provide a more accurate representation of the actual cash that will be generated by a project.

What is the use of capital budgeting techniques in businesses? ›

Capital budgeting is one of the most important areas of financial management. There are several techniques commonly used to evaluate capital budgeting projects namely the payback period, accounting rate of return, present value and internal rate of return and profitability index.

What are the 6 phases of capital budgeting? ›

Capital budgeting is a powerful tool and the process involves six steps: identifying investment opportunities; gathering investment proposals; deciding on the budget; preparing and appropriating the budget; implementing the capital budget; and performance review.

What is DCF techniques of capital budgeting? ›

Discounted cash flow (DCF) refers to a valuation method that estimates the value of an investment using its expected future cash flows. DCF analysis attempts to determine the value of an investment today, based on projections of how much money that investment will generate in the future.

Top Articles
Latest Posts
Article information

Author: Corie Satterfield

Last Updated:

Views: 6334

Rating: 4.1 / 5 (42 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Corie Satterfield

Birthday: 1992-08-19

Address: 850 Benjamin Bridge, Dickinsonchester, CO 68572-0542

Phone: +26813599986666

Job: Sales Manager

Hobby: Table tennis, Soapmaking, Flower arranging, amateur radio, Rock climbing, scrapbook, Horseback riding

Introduction: My name is Corie Satterfield, I am a fancy, perfect, spotless, quaint, fantastic, funny, lucky person who loves writing and wants to share my knowledge and understanding with you.